DEENGFU

 

  • Upsetting press HP 40/2
  • Upsetting press HP 40/2
  • Upsetting press HP 40/2

Upsetting press HP 40/2

Technical data:

Machine Typeupsetting press HP 40/2
Dimensions∅ 20 - 40 mm
Length200 - 500 mm
Applicationpressure vessels, drive shafts, rebars

Design:
turn-key solution

Accessories:
tube handling with separartion, inductive heating, automatic tool lubrication


Airbag pressure vessel
Airbag pressure vessel
Airbag presure vessel

Ø 30 x 1,9 mm

  • Airbag pressure vessel for side airbag
  • operating pressure approx. 600 bar / 8700 psi
  • diameter reduced on both ends using GFU reducing technology (cold forming)
  • bottom closed with GFU high-speed end-forming (hot forming)
  • both ends mechanical treated
  • 100% measuring of all parts
  • Poka Yoke check system
Airbag pressure vessel
Scaffold rod
Scaffold rod

Scaffold rod

Ø 50 x  2,3 mm

  • welded ingoing tube without scraping of weldseam
  • diameter on both ends reduced (cold forming) to Ø 40,3 mm 
  • both ends forming length approx. 310 mm 
  • reduction grade > 20%
Scaffold rod
OCTG Casing 14"
OCTG Casing 14"

OCTG Casing

Ø 14" x 20 mm

  • conical expanded by cold forming
OCTG Casing 14"
OCTG Casing 16"
OCTG Casing 16"

OCTG Casing

Ø 16" x 17,5 mm

  • conical reduced by cold forming
OCTG Casing 16"
Steering shaft
Steering shaft

Steering shaft / power steering

Ø 50 x 2 mm

  • one side reduced to Ø 47 mm
Steering shaft
Push point
Push point

Push point

Ø 2" – 7"

  • wall thickness  4,0  - 12,7 mm
  • tensile strength approx. 550 - 950 N/mm²
  • diameter reduced on one side (cold operation)
  • max. forming length approx. 500 mm
  • max. reduction approx. 38% - 45% depending on material grade
Push point
Steering shaft
Steering shaft

Steering shaft

Ø 50 x 2 mm

  • one side expanded to Ø 53 mm
Steering shaft
Tie bar for trucks
Tie bar for trucks

Tie bar

Ø 50 x 4,8 mm

  • one side reduced to Ø 42 mm
Tie bar for trucks
Cardan shaft
Cardan shaft

Cardan shaft

Ø 88,9mm x 1,9 mm

  • reduced by cold forming
Cardan shaft
Tie bar for trucks
Tie bar for trucks

Tie bar

Ø 60 x 5 mm

  • one side reduced to Ø 48 mm
Tie bar for trucks
OCTG Casing 16"
OCTG Casing 16"

OCTG Casing

Ø 16" x 14 mm

  • conical expanded by cold forming
OCTG Casing 16"
OCTG Casing 7"
OCTG Casing 7"

Casing reduced

Ø 7" x  12,6 mm

  • reduced by cold forming
OCTG Casing 7"
OCTG Casing 18 5/8"
OCTG Casing 18 5/8"

OCTG Casing

Ø 18.5/8" x 20 mm

  • conical reduced by cold forming
OCTG Casing 18 5/8"
Push point
Push point

Push point

Ø 2" – 7"

  • wall thickness 4,0  - 12,7 mm
  • tensile strength approx. 550 - 950 N/mm²
  • diameter reduced on one side (cold operation)
  • max. forming length approx. 500 mm
  • max. reduction approx. 38% - 45 % (depending on material grade)
Push point
OCTG Casing 13 3/8"
OCTG Casing 13 3/8"

OCTG Casing

Ø 13.3/8" x 22 mm

  • conical reduced by cold forming
OCTG Casing 13 3/8"

© Copyright 2015 | All Rights reserved